Best Violin Pegs: Top 7 Fine Tuners + Fitting Guide!

Best Violin Pegs


Violin pegs are used to tune the violin strings. The strings are tightened and the notes are raised by turning the pegs, and the strings are loosened and the notes are lowered when you turn the pegs the other way.

There’s a violin peg for every one of the 4 strings, generally known as G, D, E, and A, and match into the peg holes within the pegbox on the top of the violin.

One end of a violin peg has a flat spherical handle that’s comfortably pinched between the fingers for turning and securing the peg. On the opposite end of the peg is a submit that’s tapered, which permits the pegs to be pushed into the peg holes as soon as the string is in tune.

The commonest materials used to make violin pegs are ebony, boxwood, or rosewood. Pegs are typically manufactured from composite materials developed for power, minimal slippage, and decreased shrinking and swelling from humidity.

The pegs on stringed instruments, together with those within the violin family, are most frequently black.

All violin pegs have a small string gap drilled into the wood a few thirds of the way in which up from the tip of the post. To string an instrument, the string is hooked into the tail and is then rested on the bridge’s string notch.

Next, holding the free end of the string, the violinist will pull the peg barely out from one of many pegbox holes and thread the string through the peg’s string gap. The violinist will then slowly twist the peg clockwise to extend the strain on the string.

We just want to let you know that we’ll list these violin pegs reviews in no particular order. They’ll be randomized as we don’t wish to sort them from best to worst.

Listed below are our Top 7 Best Violin Pegs for 2023:

1. Docooler 4/4 Size Violin Fiddle Tuning Peg 4pcs Set

If you are after a durable set of tuning pegs for your violin that will not break your bank, these are a great choice for you. They are prefit, but maybe you will need to make a tiny little adjustment.

We can suggest to you not to try and use force when fitting them in, but try to do slight changes to them to fit properly in. They are made of good and sturdy ebony wood and are coming in black color.

They are made really precisely to fit any violin and we believe that you will be satisfied if you decide to go with this choice. For less than 10 dollars, you will have nothing to regret, but be able to receive some good tuning pegs for your instrument.

Docooler 4/4 Size Violin Fiddle Tuning Peg 4pcs Set

2. 8Pcs Yootones 4/4 Wooden Violin Tuning Tuner Pegs

This set of Yootones violin pegs is made from very quality wood and the surface of the pegs is smoothed out and polished. They will be a very strong choice and will not let you down.

With this set, you will get 8 pegs that you will be able to fit for your stringed instrument. If you do a good job, you might even fit them in 3/4 sized violin, but we’ll leave that up to you if you are a risk-taker and willing to try them out.

Anyway, you will have 8 pieces to have some spare ones and you will have space to experiment. They come predrilled for the strings slot and you will be able to use them straight out of the box.

8Pcs Yootones Wooden Violin Tuning Tuner Pegs

3. Anton Breton VP-140 Violin Tuning Pegs

Anton Breton violin pegs are handcrafted from the best ebony, rosewood, and boxwood – artistically designed for magnificence and sturdiness. Many models can be found in all the fractional sizes (4/4 to 1/16.)

The costlier units feature ebony or gold-plated steel ball ornaments. They’re accurately formed and equipped with slightly-oversized shafts, prepared for ultimate fitting by the expert luthier.

Handcrafted from the best grade-A ebony artistically designed for beauty and sturdiness. Appropriately formed with barely oversized shafts prepared for little adjustments to fit your instrument correctly.

Good to be used as replacements on any classic instrument or to be used on any new build. Obtainable as a set of 4

Once more for a bargain price, you will be able to get a nice set of pegs violin can benefit from. Highly suggested by Strings Kings.

Anton Breton VP-140 Violin Tuning Pegs

4. Knilling 4/4 size Perfection Planetary Geared Violin Peg Set

These tuning pegs from Knilling are nice for a wide range of reasons. First, from a visible perspective they give the impression of being almost equivalent to conventional wood pegs, which is very vital for professional violin players who want to preserve their aesthetic the same.

Moreover, their inside gear design makes these pegs extremely simple to tune, which is nice for new players, younger players, and older players who lack the hand power to tune their instrument with wood pegs.

Their 4:1 gear reduction additionally makes it so that a positive tuner shouldn’t be required on the tailpiece.

Whereas these pegs are easy to put in, it’s endorsed that professional installs these pegs. After that, nevertheless, you can be set and in a position to simply use your pegs to tune your instrument with ease.

Whereas these will not be the most affordable pegs on the market, they’re high-quality ones that may last you for years to return and can help you simply tune your instrument at any time when you need to.

Knilling Perfection Planetary Geared Violin Peg Set

5. Drfeify Violin Tuning Pegs

Product of qualified ebony, firm and sturdy to use, ensures a very long time service. It is a widely known durable material that can last you long.

The violin pegs are used to interchange your old or damaged peg. Excessive density, difficult to wreck. Nice accessory for violin lovers. You can not go wrong with this pick.

Pure manual handcrafted, wonderful treatment with good texture, high-quality pattern and basic design, elegant and exquisite. Authentic color manufacturing, won’t fade. Excellent craftsmanship onto them, you’ll be amazed.

There are four pieces of violin pegs in a bundle, it is rather convenient to use. Straightforward to fit, possibly with a little adjustment and you may be good to go!

Drfeify Violin Tuning Pegs

6. WITTNER ZW 916-Violin Pegs

These clever pegs allow simple and correct tuning without the necessity for high-quality tuners on the tailpiece. Professional fitting is strongly suggested. Pegs are sized by the diameter of the shaft on the collar.

To permit fitting, the peg side hole within the pegbox of the instrument needs to be a minimum of 1mm lower than this diameter. Please note using a tapered reamer is crucial to suit these pegs accurately.

Full set of four pegs, Very simple, quick, and exact tuning, Gear ratio from 8.5 to 1, in comparison with a traditional peg.

Peg manufactured from Hi-Tec composite materials and lightweight metal alloy, Set up within the pegbox without adhesive, only by pressing as with a traditional peg.

Self-holding gear, the string cannot unwind, No put on on the peg gap and pegs, because the shaft doesn’t rotate, thus no friction, Unaffected by local weather & design, dimensions, color, and qualities stay consistent.

WITTNER ZW 916-Violin Pegs

7. Bnineteenteam 4 Pcs Ebony Violin Pegs

The violin pegs are manufactured from high-quality ebony wood materials, clean surface, are hard to break, are sturdy for a very long time of use, and are handy for tuning the strings.

Pure manual handmade, glorious treatment with good texture, with ornamental shell dot. Light-weight and portable, simple to put in and use.

Product of certified ebony, firm and sturdy to use, nice pattern and basic design, elegant and delightful, ensures a very long time service.

Nice accessory for violin fans. Important for medium and high-quality violin. Can be utilized to exchange rusty, damaged, and old string shafts.

If you are at the point where you need to change your tuning pegs, this is a nice set to reach out for. They are very affordable and will solve any issues if you have broken pegs on your instrument.

Bnineteenteam 4 Pcs Ebony Violin Pegs

Wood or Composite

When you’ve discovered the sizing, choosing violin pegs is more of a process of personal selection. And the luthier you’re working with can assist you to make sure they match the type of your violin. Pegs are available in both solid wooden and artificial or composite materials.

Composite violin pegs are most frequently a mix of a wooden peg and a synthetic turning key. Because the key is the part that’s seen, some would say the man-made materials take away from the fantastic thing about the instrument.

One other drawback is that wood might be adjusted simply, whereas the tuning box needs to be adjusted to just accept synthetic pegs.

Most luthiers have a tendency towards a purist viewpoint and advocate you select wood violin pegs made out of ebony, boxwood, or rosewood.

If you happen to attempt to save money and purchase cheaper variations, it’s possible you’ll end up tuning the instrument more often, as a result of the lower quality pegs are seemingly not a product of seasoned wood. Unseasoned wood is extra susceptible to shrinkage because of humidity.

How are These Pegs Different From Each other?

The pegs only fluctuate from one another based mostly on the fabric they had been made out of. The artificial plastic sorts are made with plastic, whereas the wooden pegs are made with completely different sorts of wood.

The several types of pegs may fluctuate within the materials, however, they’re all meant to do the same thing. The distinguishing factor is that some will do it better than others, and that’s when the standard of the materials is available.

That explains why wooden pegs are the extra widespread option for many violinists.

best violin pegs

Guide on How to Fit Violin Pegs

Now that you understand the different types of pegs, you may need to know learn how to fit them onto your violin. If you’re wondering, it’s possible to purchase new pegs for your violin and substitute the original ones that got here with the violin while you first bought it.

Pegs can’t work correctly till they’re fitted within the actual tapered hole. Before you start feeding the peg into the hole:

  • Take away the pegs of the fiddle and the strings.
  • Place the reamer within the string’s holes and twist it just a few times gently. Once you discover fresh wood on the wall holes, you possibly can transfer on to the following hole.
  • Place every peg of their designated peg box as you shape them
  • Typically experts additionally utilize peg lubes to suit the pegs into the holes seamlessly. Furthermore, violinists additionally use T-handles reamers to form the peg holes if needed. Shapers permit the pegs to be shaved within the required form in order that they glide in easily.
  • After putting in all of them, you can measure the gap between the peg’s collar and the pegbox. You’ll be able to assure that they’re at 3/8″ apart. If the pegs are put in too far apart, you won’t have the ability to put the fiddle away either.


No matter if you go for the plastic or metal pegs, or you decide to go with ebony or rosewood pegs, they will serve the purpose of applying tension to your strings. Most of these picks have similar features, so you cannot go wrong with them.

Our stringed instruments, not only the violins will have some pegs on them, but if you are at the point to exchange them, you can try any of our suggestions here we have in this list above.

In case you are having any questions about these little accessories that the violins have on them, let us know in the comment section and we will try to help you out!

Charles Steinhoff

Charles Steinhoff

Charles is here and I am guitar and ukulele enthusiast. Been playing these instruments for over 10 years now and I decided to share some of my knowledge and expertise with the world in terms of these stringed instruments and it's accessories.

Strings Kings
Strings Kings